Play Video

• 

  Step 1: Plan ahead

  Place the cabinet against the wall where you want it to hang.
  
  Put the level on top and level the cabinet.
  
  Open the door and drill through the pre-made hanging holes into the wall.
  
  
  
  Tip: Before drilling always make sure there are no pipes or electrical fixings behind the wall by using a mini metal detector.

• 

  Step 2: Hang the cabinet

  Push fixings into each of the holes.
  
  Use a hammer to hammer them flush with the wall.
  
  Put the cabinet back into place and affix the screws.
  
  
  
  Tip: There are different fixings for plaster, wood and masonry. Make sure you use the ones that match your wall type.

• 

  Step 3: Level the cabinet

  If your wall has character (ie. it slopes in or out) you may have to level your cabinet back to front. To do this, loosen the screws at either the top or bottom of the cabinet, depending which way your wall leans.
  
  Place the cut wedges behind the cabinet until it is vertical.
  
  Tighten the screws.
  
  Remove the wedges, and your cabinet should hang straight.